Concord Camera 5345z - Manual (Page 13)

12
Changing the Lighting Hz
Different countries use different lighting frequencies. The US uses a
60Hz frequency while Europe uses a 50Hz frequency. The Easy Too
camera gives you the option to switch the Hz frequency as you
travel. To change the frequency, press the Feature Button until the
frequency option denoted by either 50 or 60 is displayed in the LCD.
Press the shutter button to change the frequency from the number
displayed in the LCD to the other frequency option.
High Density mode (Hd)
Press the Feature Button until ‘Hd’ appears in the LCD. Press the
shutter button one more time to change to the high density mode. In
the high density mode, the number of pictures that you can take will
be doubled in both Hr/Lr resolution.
To switch back to the normal (low density) mode, press the Feature
Button until ‘Ld’ appears in the LCD. Press the shutter button again
to change back to normal mode.
High/low density chart
Resolution Picture stored
HI/Ld 640 x 480 26
HI/Hd 640 x 480 52
Lo/Ld 320 x 240 107
Lo/Hd 320 x 240 209
Note: The counter will start from 99 pictures while in the low
resolution mode even though the camera can store more pictures.
Please see the chart above for more details.
Easy Too Inst.Manual(5S1048-00) 19/6/02 9:49 am Page 12