5 single lamp mode – Colorlight CL20 User Manual
Page 43

MAIN MENU
User’s Manual
Page 43
11.8.6.5
Single lamp mode (standard function available from ver. 0.5.3.11)
Note: Button numbers below refers to
Normally, for double white (CLXX-11) or double UV (CLXX-22) configuration one wants to ignite
both bulbs simultaneously and thereby obtain maximum light intensity with the push of a single
button.
However, there are occasions when it may be useful to give each bulb a dedicated light button,
this setting is done in the "Single lamp mode" menu.
By
selecting single lamp mode “On” and confirm by pressing “OK”, the left bulb will turn on / off
by pressing the left light button (2) and right bulb on / off by pressing the right light button (5).
Note: The function "park" turns off both lights at the same time regardless of the setting in this
menu.
The default setting at delivery
is “both bulbs on” by pressing left light button (2) or right light
button (5)