4 switch, Switch – Colorlight CL20 User Manual
Page 27

QUICK START MENU
User’s Manual
Page 27
10.4 Switch
If there are more than one ColorLight Searchlight in the system any operating panel can control
any of the connected ColorLight searchlights. Every searchlight should be given a unique name
during installation for this to work properly.
To enter the “Switch” submenu open up the quick start menu and press the upper right button.
In this menu all the available searchlights should be listed. To change which searchlight being
controlled, navigate to the
desired searchlight and press “OK”.
The operating panel should now control the newly selected searchlight which is shown on the
indicator page.
This manual is related to the following products: