BMW 2007 bmw 328i - Manual (Page 79)

Co
n
tr
o
ls
77
Re
fe
re
n
c
e
At
a
g
la
n
c
e
D
riv
in
g ti
ps
C
o
m
m
uni
ca
ti
o
n
s
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
M
o
bi
lity
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 74
3 When the lights are on: instrument lighting
brightness 100
4 Calling up Check Control 82
5 Checking oil level 215
6 Setting the time 80
7 Setting the date 81
8 Viewing service requirement display 77
Exiting displays
The outside-temperature reading and the time
reappear when you press button
2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
You can set units of measure. The settings are
stored for the remote control currently in use,
refer also to Personal Profile on page
28 .
iDrive, for operating principle refer to page 16 .
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Language / Units" and press the
controller.
5. If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Units" is selected and press the con-
troller.
6. Select the desired menu item and press the
controller.
7. Select the desired measurement unit and
press the controller.
Service requirements
The remaining driving distance and the date of
the next scheduled service are displayed briefly
immediately after you start the engine or switch
on the ignition.
The extent of service work required can
be read out from the remote control by
your BMW Service Advisor. <
For certain maintenance operations, you can
view the respective distance remaining or due
date individually in the instrument cluster.
1. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the words "SERVICE-INFO".
2. Press button 2.
3. Use button 1 to scroll through the individual
service items.
Online Edition for Part no. 01 41 0 012 928 - © 08/06 BMW AG