Yealink SIP-T22 - Manual (Page 26)

User Guide SIP-T22P/SIP-T22 IP Phone
14
2. Enter the IP address in the browser’s address bar, and then press Enter.
3. Enter the user name (admin) and password (admin) in the login page.
4. Click Confirm to login.
The phone status is displayed on the first page of the web user interface.
If your phone cannot contact a DHCP server for any reason, you need to configure
network settings manually. The IP phone can support either or both IPv4 and IPv6
addresses.
To configure the IP address mode via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin) ->Network->WAN
Port.