Yealink SIP-T19 - Manual (Page 5)

About This Guide
v
Thank you for choosing the SIP-T19P/SIP-T19 IP phone, exquisitely designed to provide
business telephony features, such as Call Hold, Call Transfer, Multicast Paging and
Conference over an IP network. The difference between the SIP-T19P and SIP-T19 IP
phone is that the former supports PoE, while the latter does not
.
This guide provides everything you need to quickly use your new phone. First, verify
with your system administrator that the IP network is ready for phone configuration. Also
be sure to read the Packaging Contents and Regulatory Notices sections in this guide
before you set up and use the SIP-T19P/SIP-T19 IP phone.
If this is your first time using the SIP-T19P/SIP-T19 IP phone, we recommend that you first
refer to the
Quick Installation Guide and Quick Reference Guide , available online:
http://www.yealink.com/SupportDownloadfiles_detail.aspx?CateId=334&flag=142 .
Note
Topics provided in this guide include:

Chapter 1 Overview

Chapter 2 Getting Started

Chapter 3 Customizing Your Phone

Chapter 4 Basic Call Features

Chapter 5 Advanced Phone Features
This section describes the changes to this guide for each release and guide version.
Major updates have occurred to the following section:

Packaging Contents on page 9
Shared Line, Network Directory, Network Call Log, Call Park and Automatic Call
Distribution features are disabled for IP phones in neutral firmware, which are designed
for BroadWorks environment. Please contact your system administrator for more
information.