Cooper Instruments & Systems LTL 730 Wireless Tension Link Load Cell - Manual (Page 4)

LTL Quick User Guide January 3, 2008 LTL_QUG_en_500201.fm AWT35-500201 Issue AA
Common Configurations
LTL being used stand-alone (no RS-232 or Communicator remote)
Key Settings (LTL): COM1 Trans Level – Disabled
COM2 Trans Level – Disabled
LTL connected to a computer
Key Settings (LTL):
COM1 Trans Level – Disabled
COM2 Trans Level – RS-232 (all other parameters should agree with peripheral such as baud, data bits & parity)
Communicator connected to one LTL by wire
Key Settings (LTL and Communicator):
COM1 Trans Level – Disabled
COM2 Trans Level – RS-485 Address: 1 Channel: 1
Communicator talking to one LTL by radio
Key Settings (Communicator):
COM1 Trans Level – Disabled or RS-232
COM2 Trans Level – RF
Radio Channel (1-64): 1
Number of LTLs in the Network (1-15): 1
Address of LTL 1: 1
Key Settings (LTL):
COM1 Trans Level – Disabled
COM2 Trans Level – RF
Radio Channel (1-64): 1 Network ID (1-15): 1
Network Identifier: (enter characters or digits to identify this specific LTL) (most useful if multiple LTLs are
networked to one Communicator)
See the
Common Configurations in the User Manual on the CD for more detail on configurations.
Check your user manual CD for complete operating instructions.