Cooper Instruments & Systems PTT 260 Digital Pressure Sensor - Manual (Page 9)

CF 197 6 I&M011-10172 Rev A 5/11
9. FUNCTION SETTING MODE
Setup Steps
Pressing the key greater than 3 seconds will display Function Setting Mode. Scroll through
appropriate displays and select feature to change/confirm. LED ring will flash until this menu is exited
to the Measurement Mode by holding the key for more than 3 seconds. The setting mode is
used to select comparator operation, pressure unit, indication scaling, scaling of analog output and
filter time constant.
Note: Editing the setting value in function setting mode recalculates all of the setting values including
the comparator. Please note that when the recalculated setting values are out of the display range,
they will be adjusted to the upper or lower limit value that can be processed internally.
Function Setting Notes
Comparator Operation Selection
For the unit equipped with two comparator output option, both comparators will be in the same
operation mode.