Comparator switch setting mode / loop check mode – Cooper Instruments & Systems PTT 260 Digital Pressure Sensor User Manual

Page 12

Text mode
Original mode

CF 197

I&M011-10172 Rev A 5/11

Example 1) Pressure range 0.00~1450 psi (0.0~100.0%F.S.) corresponding to analog output of
4~20mA dc is scaled to pressure range 0.00~1,423 psi (0.0~98.1%F.S.) corresponding to analog
output 4~20mA dc.

10. COMPARATOR SWITCH SETTING MODE / LOOP CHECK MODE

Setup Steps

Pressing the

key for less than 3 seconds will display message within the Comparator

Setting/Loop Check Mode. Scroll through appropriate displays and select feature to change/confirm.

LED ring will flash until this menu is exited to the Measurement Mode by holding the

key for

more than 3 seconds.