Carlo Gavazzi RAD Series - Manual

100 (3.937”)
4
0
(1
.5
7
5
”)
M
in
im
u
m
C
le
a
ra
n
c
e
2
3
(0
.9
0
5
”)
Ш 8 (5/16”)
Ш 3 (1/8”)
Ш 3 (1/8”)
13
(0.511”)
Ceiling
Safety Notes
Inside View
Cover Removing
Red LED IR Receiver Green LED
Push Button
DEC (-)
Push Button
INC (+)
Electrical Connections
Caution:
Power on the radar by Class2 or LVE transformer.
Do not power on the radar until all primary and secondary wiring is completed.
Installation Tips
Fix firmly radar
sensor to the wall.
Avoid the presence
of moving objects
in radar
sensing
field.
Not install panels or
metallic
surfaces
close to the device.
Not install radar
on direct exposure
of rain. Not install radar
close to fluorescent
lamp.
Drilling Plan mm (inches)
Mounting Instructions
Wall mounting. Ceiling mounting.
To install radar is necessary only a screwdriver and drill.
Detection Area Shape modifying instructions
To adjust the type of the sensing field and pattern, verify the following instructions:
RAD 01 To obtain wide pattern install the planar antenna in vertical mode, while to obtain narrow pattern
install the planar antenna in horizontal mode. Carefully remove the fixing tie clip with a screwdriver
and change the orientation mode of planar antenna.
CAUTION!
Power off the radar before removing the planar antenna.
The radar is an electrostatic sensitive device: proceed with caution to remove the planar antenna,
don’t wear synthetic clothes or rubber sole shoes.
Lateral angle rotation 0°
Lateral angle rotation 15°
Planar antenna
vertical angle
Sensing Field adjustment
Mechanical sensor orientation
Adjust the vertical position to obtain the vertical sensing field close or far from the door. Adjust the lateral position to obtain the desired lateral angle sensing field.
Planar antenna
vertical angle
Sensing field adjustment according to Sensitivity setting and mounting Height
The sensing field area size (lobo) depends on the sensitivity parameter setting and the radar mounting height.
Detection area vs Sensitivity value (vertical angle 45°).
Detection area vs Sensitivity value (vertical angle 15°).
RAD 02 Uni & Bidirectional Model RAD 01 Bidirectional Model
Detection area vs Sensitivity value (vertical angle 45°); vertical mount mode.
Detection area vs Sensitivity value (vertical angle 45°); horizontal mount mode.
Planar
Antenna
Remove cover from behind, before installation.
After installation from the front side, insert the screwdriver in the provided slot.
RAD 01 To obtain wide pattern L1 install
the planar antenna in vertical mode. RAD 01 To obtain narrow pattern L2 install
the planar antenna in horizontal mode.
RAD 02 To obtain narrow pattern L3 or L4.
Motion Radar Sensor is a digital uni or bidirectional
motion sensor for trouble-free opening of all types of
automatic doors (sliding, swinging, folding, revolving,
speed-doors, overhead doors, etc...), for pedestrian
and civil applications.
It can be adapted to every application without further
accessories and can be controlled by an infrared
remote controller. Mounting height up to 4m (13.12ft)
also available in uni- or bidirectional mode to detect
motion towards or away from the device. Like most of
other microwave detectors, equipped with planar flat
antenna, Carlo Gavazzi Radar activates automatic
doors utilizing doppler shift effect for detecting
movements.
M Mo ottiio onn RRa ad da arr S Seennsso orr
RRA AD D S Seerriieess
CARLO GAVAZZI
A u t o m a t i o n C o m p o n e n t s
Cable inlet
Read Instructions!
Before working with this unit, read these instructions
carefully and completely. Make sure that you have
understood all the information!
Disconnect system from supply network
Before any installation, maintenance or modification
work:
Disconnect your system from the supply network.
Ensure that cannot be re-connected inadvertently!
Before start of operation ensure appropriate
installation
Warning! Improper installation / operation impair
safety and result in operational difficulties or complete
failure of the unit.
The unit must be installed and put into service
appropriately by qualified personnel. Compliance with
the relevant regulations must be ensured.
With stranded wires: all strands must be secured in
the terminal blocks (potential danger of short circuit).
In operation: No modifications!
As long as the unit is in operation: do not modify the
installation! The same applies also to the secondary
side.
• The unit must not be opened except appropriately
trained personnel!
• Do not introduce any object into the unit!
• Keep away from fire and water!
FCC warnings
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired
operation.
© Copyright – Carlo Gavazzi - All rights reserved
This manual accompanies our equipment for use by the end users.
The technical instructions and illustrations contained in this manual are to be treated as confidential and no part
may be reproduced without the prior written permission of Carlo Gavazzi
Service engineers and end users may not divulge the information contained herein or use this manual for
purposes other than those strictly connected with correct use of the equipment.
Specifications are subject to change without notice. Pictures are just an example.
L1 L2 L3 L4 L5 L6
EXIT EXIT EXIT EXIT EXIT
1 2
3
4 5
45° 15°
1.5
2.5
0.5
4.5
m
4.5
m
3.5
0.5
1.5
2.5
3.5
0.5
1.0
1.5
2.0
2.5
3.0
m
0.5
1.5
2.5
3.5
4.5
m
0.5
1.0
1.5
2.0
m
0.5
1.0
1.5
2.0
m
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0
m
m
m 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0
m
m
m 3.0
S1
S5
S8
S10
S2
S4
S6
S10
S8
S1
S5
S8
S10
S4
S6
S8
S1
S5
S10
S1
S8 S10
S9
S10
4.
92
8.
20
1.
64
14
.7
6
ft
11
.4
8
4.
92
8.
20
1.
64
14
.7
6
ft
11
.4
8
1.
64
3.
28
4.
92
6.
56
8.
20
9.
84
ft
1.
64
4.
92
8.
20
11
.4
8
14
.7
6
ft
1.
64
3.
28
4.
92
6.
56
ft
1.
64
3.
28
4.
92
6.
56
ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84
9.
84 ft
0
1.6
4
1.6
4
3.2
8
3.2
8
4.9
2
4.9
2
6.
56
6.5
6
8.
20
8.2
0
9.
84
9.8
4
ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84
9.
84
9.
84 ft 0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
9.
84
9.
84
1.5
2.5
0.5
4.5
m
4.5
m
3.5
0.5
1.5
2.5
3.5
0.5
1.0
1.5
2.0
2.5
3.0
m
0.5
1.5
2.5
3.5
4.5
m
0.5
1.0
1.5
2.0
m
0.5
1.0
1.5
2.0
m
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0
m
m
m 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0
m
m
m 3.0
S1
S5
S8
S10
S2
S4
S6
S10
S8
S1
S5
S8
S10
S4
S6
S8
S1
S5
S10
S1
S8 S10
S9
S10
4.
92
8.
20
1.
64
14
.7
6
ft
11
.4
8
4.
92
8.
20
1.
64
14
.7
6
ft
11
.4
8
1.
64
3.
28
4.
92
6.
56
8.
20
9.
84
ft
1.
64
4.
92
8.
20
11
.4
8
14
.7
6
ft
1.
64
3.
28
4.
92
6.
56
ft
1.
64
3.
28
4.
92
6.
56
ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84
9.
84 ft
0
1.6
4
1.6
4
3.2
8
3.2
8
4.9
2
4.9
2
6.
56
6.5
6
8.
20
8.2
0
9.
84
9.8
4
ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84
9.
84
9.
84 ft 0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
9.
84
9.
84
h = 2.2m
h = 7.22ft
h = 2.2m
h = 7.22ft
1.5
2.5
0.5
4.5
m
4.5
m
3.5
0.5
1.5
2.5
3.5
0.5
1.0
1.5
2.0
2.5
3.0
m
0.5
1.5
2.5
3.5
4.5
m
0.5
1.0
1.5
2.0
m
0.5
1.0
1.5
2.0
m
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0
m
m
m 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0
m
m
m 3.0
S1
S5
S8
S10
S2
S4
S6
S10
S8
S1
S5
S8
S10
S4
S6
S8
S1
S5
S10
S1
S8
S10
S9
S10
4.
92
8.
20
1.
64
14
.7
6
ft
11
.4
8
4.
92
8.
20
1.
64
14
.7
6
ft
11
.4
8
1.
64
3.
28
4.
92
6.
56
8.
20
9.
84
ft
1.
64
4.
92
8.
20
11
.4
8
14
.7
6
ft
1.
64
3.
28
4.
92
6.
56
ft
1.
64
3.
28
4.
92
6.
56
ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84
9.
84 ft
0
1.6
4
1.6
4
3.2
8
3.2
8
4.9
2
4.9
2
6.
56
6.5
6
8.
20
8.2
0
9.
84
9.8
4
ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84
9.
84
9.
84 ft 0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
9.
84
9.
84
1.5
2.5
0.5
4.5
m
4.5
m
3.5
0.5
1.5
2.5
3.5
0.5
1.0
1.5
2.0
2.5
3.0
m
0.5
1.5
2.5
3.5
4.5
m
0.5
1.0
1.5
2.0
m
0.5
1.0
1.5
2.0
m
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0
0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0
m
m
m 3.0 0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0
m
m
m 3.0
S1
S5
S8
S10
S2
S4
S6
S10
S8
S1
S5
S8
S10
S4
S6
S8
S1
S5
S10
S1
S8 S10
S9
S10
4.
92
8.
20
1.
64
14
.7
6
ft
11
.4
8
4.
92
8.
20
1.
64
14
.7
6
ft
11
.4
8
1.
64
3.
28
4.
92
6.
56
8.
20
9.
84
ft
1.
64
4.
92
8.
20
11
.4
8
14
.7
6
ft
1.
64
3.
28
4.
92
6.
56
ft
1.
64
3.
28
4.
92
6.
56
ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84
9.
84 ft
0
1.6
4
1.6
4
3.2
8
3.2
8
4.9
2
4.9
2
6.
56
6.5
6
8.
20
8.2
0
9.
84
9.8
4
ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84
9.
84
9.
84 ft 0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
0
1.
64
1.
64
3.
28
3.
28
4.
92
4.
92
6.
56
6.
56
8.
20
8.
20
9.
84 ft
9.
84
9.
84
h = 2.2m
h = 7.22ft
h = 2.2m
h = 7.22ft
L1 L2 L3 L4 L5 L6 L1 L2 L3 L4 L5 L6
L1 L2 L3 L4 L5 L6 L1 L2 L3 L4 L5 L6
Note: S1...S10 sensitivity levels setting.
Lateral angle rotation -15°
Main Connector
Relay NO contact
Relay NC contact
Relay Common
Supply Voltage
12 to 24 VAC/DC
12 to 24 VAC/DC