BE Pressure supply 80 Gallon Enclosed Rotary Screw Compressor AC1080SQ - Manual (Page 27)

27
ALWAYS MAKE SURE POWER IS OFF
BEFORE WIRING COMPRESSOR
Punch out hole in starter box for power inlet.
1
Remove Starter
lid cover
2
Place 1 of the incoming
power lines under the
starter screw shown
Place ground wire
behind washer for a
proper ground
Place the other incoming
power line under the
starter screw shown
3
4
Once the steps are complete make sure all connections are tight and
place cover back on the box, before turning the machine on.
compressor diagram