B&G Network Speed - Manual (Page 5)

SELECTING THE DISPLAY MODE
The Network SPEED unit has three operating modes. The
correct mode must be selected for your Network system to
operate properly.
trA Transducer mode, the unit uses and displays speed
data from a speed sensor connected directly into the
display unit.
rEP Repeater mode, the unit operates as a speed repeater
using data from the system network.
d
Demo mode, the unit runs an internal demonstration
program.
Press LOG key to
display stored log.
Press SETUP key
to display the
current mode. Press ENTER key
if the mode needs
to be changed. Press ENTER to
store the new
mode in memory. Press LOG to
complete the
change. Use ¿ or À to
change mode.
5