B&G H1000 Wind Interface Box - Manual (Page 3)

trademark
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means
including photocopying and recording, without the express written permission of B&G.
Information in this document is subject to change without notice. B&G reserves the right to change or improve its
products and to make changes in the content without obligation to notify any person or organisation of such
changes.
warnings & precautions
MHU contains no user-serviceable parts. Repairs should only be made by an authorised service centre.
Unauthorised repairs or modifications will void your warranty.
The electronics at the top of your B&G MHU are delicate and care must be taken not to damage them.
Ideally, your mast should be removed from the boat and properly supported prior to installation, however it is
possible to mount the B&G MHU while the mast is standing.
technical specifications
Base Fitting Diameter mm: 61mm
MHU forward extension (centre-centre) 245mm
Operating Temperature range: 0°C to +55°C
Storage Temperature range: -10°C to +80°C
Humidity: Up to 95% RH
Accessories: Bracket