Clarity XL-25S User Manual

Page 18

N
G

Troubleshooting Chart

CAUSE AND
CORRECTIVE
ACTION
Check all phone
cord connections.
No number stored
in that memory
button. See:
“Programming the
Memory buttons”.

See “Setting Up
Your Phone” to
reset the dial
mode switch.

Make sure the
ringer is not set to
the OFF position.

Check and replace
the 9 Volt battery

SYMPTOM

No dial tone

No number
dialed when
memory
button
pressed

Call cannot
be dialed, or
dials very
slowly

An incoming
call does not
produce an
audible ring

Ring flasher
not very
bright

The chart below will help you
solve most problems that may
arise during operation of your
telephone. Should the difficulty
continue, contact Clarity at (800)
426-3738 or your authorized deal-
er for assistance.

Outgoing Volume Control
0 - 18dB

Incoming Volume Control
0 - 12dB

Dimensions
Size: 9

" x 7" x 3

Weight: 2.52 lbs.

Power Requirements
One 9 Volt alkaline battery for
ring flasher operation only. (not
included)

Specifications