Clarity XL-25S - Manual (Page 16)

13
Special Features
Programming the Memory Buttons
You can automatically dial twelve
programmed telephone numbers
using the memory buttons shown in
Figure 16. Each button can be
programmed (or reprogrammed
using the same procedure) for a
phone number up to 16 digits
long.
To program a button, follow these
steps:
1. Lift the handset and press
PROG as shown in Figure 17.
2. Enter the phone number on the
keypad (Figure 18) just as you
would dial it normally.
3. Press PROG (Figure 17)
once again.
4. Press a memory button (Figure
16) to store this number on that
button.
5. Immediately hang up the
handset.
Note: Any number previously
stored at that button number will
be overwritten.
6. To change a stored number,
repeat the programming
process starting with step 1.
E
N
G
L
I
S
H
Figure 16 - Memory Buttons
Figure 17 - PROG Button
Figure 18 - Telephone Keypad
X