Can-Am DS250 - Manual (Page 97)

PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 30 DAYS OR 200 KM (125 mi)
(To be performed by an authorized Can-Am dealer. The initial
maintenance is very important and must not be neglected.)
25 H OR 500 km (310 mi)
50 H OR 1000 km (620 mi)
100 H OR 1 YEAR OR 2000 km (1250 mi)
200 H OR 2 YEARS OR 4000 km (2485 mi)
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
T: PROCEED WITH TASK
TO BE PERFORMED BY
PART/TASK LEGEND
FUEL SYSTEM
Air filter/air injection valve filter
I,
C
(4)
R
(4)
Customer
Fuel filter I I R Dealer
Fuel lines, connections and fuel tank
pressure test
I I Dealer
Carburetor (1) A A Dealer
(1) Emission-related component.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
ELECTRICAL SYSTEM
Spark plug (5) I R Customer
Ignition timing I I Dealer
Battery connections I I Customer
Wiring harnesses, cables and lines I I Dealer
Condition of ignition switch, engine
start button and engine stop switch
(2)
I I Customer
Condition of lighting system
(HI/LO intensity, brake lamp, headlamp
aiming, etc.)
(2)
I I Customer
(2) Pre-ride inspection item.
(5) Make sure the spark plug is
correctly gapped.
DRIVE TRAIN
Drive chain lubrication EVERY RIDE Customer
Drive chain slider condition EVERY RIDE Customer
Drive chain adjustment EVERY RIDE Customer
Drive chain sprockets I I Customer
Wheel bearings I Customer
—
_____________________
95