Can-Am DS250 - Manual (Page 96)

MAINTENANCE CHART
The maintenance is very important, if you are not familiar with safe service prac-
tices and adjustment procedures, see your authorized Can-Am dealer.
PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 30 DAYS OR 200 KM (125 mi)
(To be performed by an authorized Can-Am dealer. The initial
maintenance is very important and must not be neglected.)
25 H OR 500 km (310 mi)
50 H OR 1000 km (620 mi)
100 H OR 1 YEAR OR 2000 km (1250 mi)
200 H OR 2 YEARS OR 4000 km (2485 mi)
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
T: PROCEED WITH TASK
TO BE PERFORMED BY
PART/TASK LEGEND
ENGINE/TRANSMISSION
Engine oil level (2) EVERY RIDE Customer
Engine oil R R Dealer
Engine oil strainer C Dealer
Gearbox oil I R
Dealer/
Customer
Valve clearance adjustment T T Dealer
Engine mounting fasteners I I Dealer
Exhaust system I I Dealer
Muffler spark arrester C Customer
Condition of engine seals I I Dealer
Engine coolant (2) I
I
(3)
R Customer
Radiator cap/cooling system pressure
test
T T Dealer
Radiator condition/cleanliness (4) I I Customer
Drive belt I Dealer
Drive and driven pulleys
condition/cleanliness I,
C
Dealer
CVT air inlet/outlet duct
condition/cleanliness I,
C I,
C
Dealer
(2) Pre-ride inspection item.
(3) Every 100 hours, check coolant
strength.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
94
______________________