Can-Am DS250 - Manual (Page 111)

Throttle Lever Adjustment
Slide rubber protector back to expose
throttle cable adjuster.
Loosen lock nut then turn the adjuster
to obtain correct throttle lever free
play.
NOTE: Measure throttle free play at
the tip of throttle lever.
Tighten lock nut and reinstall protector.
vmo2006-014-052_a
1. Throttle lever
2. Protector
3. Cable adjuster
A. 1 to 3 mm (.039 to .118 in)
With the transmission lever on NEU-
TRAL
position, start the engine.
Check if the throttle cable is adjusted
correctly by turning handlebar fully
right then fully left. If the engine RPM
increases, readjust the throttle lever
free play.
_____________________
109