ADS Environmental Services Eureka Digital QR 775020 A0 User Manual
Page 35
ADS Eureka Digital System User Manual
31
The user can unplug the transmitters and put them in the required location
for recording. However, it is important to place the accelerometers
correctly on the pipe.
Note:
Do not turn on the transmitter.
The dialog will display the countdown to the start of recording and then
the duration during recording. After recording is complete, the user can
collect the transmitters and read back the data.
Readback
For readback to occur, the transmitters must be off and connected to the
receiver via the y-cable.
Selecting the Readback menu option starts the Read Back Wizard.