ADS Environmental Services Eureka Digital QR 775020 A0 - Manual (Page 24)

ADS Eureka Digital System User Manual
20
Hardware and Software Setup
This section includes the minimum software and hardware requirements,
software installation instructions, and power management
recommendations.
Software and Hardware Requirements
To run the PC software, the computer must meet the following minimum
hardware and software requirements:
 Microsoft
®
Windows
®
XP (Service Pack 2) operating system
 1.1 GHz Intel
®
Centrino
®
processor
 512 MB RAM
 1 GB hard drive
 Standard USB port (socket type A)
 800- x 600-pixel display resolution (ADS recommends 1024 x 768)
Note: The Eureka Digital software should run effectively on most
users PCs. However, ADS cannot guarantee that the software will
operate free from errors on any computer that is not supplied by
ADS for use with the Eureka Digital System.
Software Installation
Install the software in the following way:
1. Insert the CD into the PC
’s CD-ROM drive. The autoplay feature
should launch the ADS interface. If the autoplay feature is not
available or functional, launch the software interface manually in the
following way:

Launch Microsoft Internet Explorer
®
.

Click on the CD-ROM drive.

Click on the file named SETUP.EXE.
2. Follow the simple, on-screen instructions to install the software
Power Management
ADS strongly recommends disabling Windows power management and
any screen savers. These may interrupt communications.