Crestron electronic Network Device PWE-4803RU - Manual (Page 6)

PoE Injector Crestron PWE-4803RU
Connectors & Indicators (Continued)
# CONNECTORS &
INDICATORS
DESCRIPTION
2 LAN PoE
LAN PoE
PIN 8 PIN 1
(1) 8-wire RJ-45 connector;
10BaseT/100BaseTX Power over
Ethernet (PoE) port;
Connects to 802.3af-compliant
powered device.
Maximum PoE load: 15.4 W
(350 mA) @ 48 VDC nominal.*
For information about pin
assignments, refer to the
illustration on the following page.
3 LAN
LAN
PIN 8 PIN 1
(1) 8-wire RJ-45 connector;
10BaseT/100BaseTX
Ethernet port;
Connects to Ethernet LAN.
For information about pin
assignments, refer to the
illustration on the following page.
4 100 – 250 VAC,
50/60 Hz
(1) IEC 320 C14 socket with
ground, mates with removable
power cord (included).
* Due to the inherent voltage drop over copper wire, a maximum of 12.9 W is
guaranteed to be received by the PoE powered device over a cable run length of
328 feet (100 meters).
4 • PoE Injector: PWE-4803RU Installation Guide – DOC. 6712A