Lubrication, Wheel bearings, Coulter swing arms – Great Plains SS2000 Operator Manual User Manual
Page 25: Coulter hubs, Berm conditioner, Icate sub-soiler as indicated under “ lubrica, Seasonally 8 seasonally twice a season
Great Plains Manufacturing, Inc.
Maintenance and Lubrication
21
05/17/2013
596-222M
Lubrication
Wheel Bearings
One on each guage wheel.
Type of Lubrication: Grease
Quantity: Pump grease into bearings until resistance is
felt, being careful not to pressurize seal or blow out cap.
Coulter Swing Arms
1 zerk on each hub;
Type of Lubrication: Grease
Quantity: Until grease emerges.
Coulter Hubs
1 zerk on each hub;
Type of Lubrication: Grease
Quantity: Pump grease until resistance is felt, being care-
ful not pressurize seal or blow out cap.
Berm Conditioner
2 zerk on each basket;
Type of Lubrication: Grease
Quantity: Sparingly, Do Not Over Grease.
Seasonally
8
Seasonally
Twice a
Season
50
Multipurpose
spray lube
Multipurpose
grease lube
Multipurpose
oil lube
Intervals (service hours)
at which lubrication is
required
41730
41672
41672
41864