Clarion DXZ948RMP - Manual (Page 44)

44
DXZ948RMP
English
Operations Common to Each Mode
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
“ON” or “OFF”.
4. Press the [A] button to return to the original
mode.
Setting the beep for when
buttons are operated (BEEP)
The short or long high-pitched tone you hear
when a button is operated is called a “BEEP”.
• The factory default setting is “ON”.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “BEEP” under “APPERNCE”.
ADJUST MODE
BEEP ON
APPERNCE
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
“ON” or “OFF”.
4. Press the [A] button to return to the original
mode.
Selecting each mode
This item cannot be selected when the Dolby
Pro Logic II is set to “MUSIC” or “MATRIX” (cf.
page 17).
• The factory default setting is “PRO” for AC-
PRO III and “P.EQ” for EQ SELECT.
■
AC-PROIII
When “STD” (standard mode) is selected, the
sound quality and field can be adjusted by VSE
(Virtual Space Enhancer) so that the same
audio effect can be obtained whichever seat you
are sitting in.
When “PRO” (PRO mode) is selected, the
sound quality and field can be adjusted in detail
for each seating position.
AC-PRO III STD
• Standard mode (VSE menu)
PRO
• PRO mode (position menu)
EQ SELECT P.EQ
• Equalizer mode (P.EQ menu)
BAS / TREB
• Bass / treble mode
■
EQ SELECT
When “P.EQ” (equalizer mode) is selected, the
entire frequency level range can be
compensated by a detailed smooth curve.
When “BAS / TREB” (bass / treble mode) is
selected, the frequency level can be
compensated by dividing it into 2 major levels,
bass (low tones) and treble (high tones).
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “AC-PRO III” under “SOUND” and
“EQ SELECT” under “SOUND”.
ADJUST MODE
AC - PRO III PRO
SOUND
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
the mode.
Mode selection
4. Press the [A] button to return to the original
mode.
Setting the speaker
configuration (SP-SETTING)
Set to match the speaker configuration of your
car to fully bring out the audio characteristics of
this unit.
• The factory default setting is “SW L + SW R ”.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “SP-SETTING” under “SOUND”.
ADJUST MODE
SP - SETTING
SOUND
SW L + SW R