beautypg.com

25 english, Auto store, Preset scan – Clarion DXZ948RMP User Manual

Page 25: Radio operations

background image

DXZ948RMP

25

English

Radio Operations

Preset memory

A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory.

1. Touch BAND to switch the reception band.

2. Operate the frequency display to store the

station to.

3. Touch and hold MODE for 1 second or

longer.
The preset memory list is displayed.

4. Touch and hold the preset No. to store the

station to for 2 seconds or longer.
You will hear a long beep, and the station is
stored in memory.

Auto store

Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially.

1. Touch MODE.

2. Touch and hold A-STORE for 2 seconds or

longer.
The MODE display changes to “A-STORE
and the preset No. in the auto-store
operation appears on the preset No. display.

Stations with good reception are

automatically searched, and are stored to
preset memory (No.1 to No.6) in order
from the station having the lowest
frequency.

Notes:
• When auto store is performed, stations stored to

memory so far are cleared.

• When there are fewer than 6 stations with good

reception in LOCAL SEEK, low frequencies are
automatically returned to, and auto store is
performed again by DX SEEK. If there are fewer
than 6 stations even after auto store is performed
twice, stations stored so far remain in memory.

• If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.

Preset scan

Preset scan is a function for receiving stations in
the order that they are currently stored to preset
No. so that broadcasts can be checked.

1. Touch MODE.

2. Touch P-SCAN.

The MODE display changes to “P-SCAN
and the preset No. in the preset scan
operation is displayed in the preset No.
display.
* The currently stored stations are received

in order for 7 seconds or longer each.
Stations with poor reception are skipped,
and the next station is received.
When preset scan is performed in an FM
broadcast, FM stations are received as
follows:

FM1 (1

6)

FM2 (1

6)

FM3 (1

6)...

When preset scan is performed in an AM

broadcast, AM stations are received as
follows:

AM (1

6)

AM (1

6) and so forth.

To cancel preset scan

1. Touch P-SCAN.

The P-SCAN display changes to “MODE”,
and the stations that were being received
when P-SCAN was touched are received
next.