Great Plains 2025P-16TR30 Assembly Instructions - Manual (Page 5)

Great Plains Mfg., Inc.
Installation Instructions 5
02/15/2010 118-255M
Install Eyebolts
Refer to Figure 7
24. Working from drill left to right, select one (1) set:
802-233C SP EYE 1/4-20X2 3/4
804-006C WASHER LOCK SPRING 1/4 PLT
and two (2) sets:
804-007C WASHER FLAT 1/4 SAE PLT
803-006C NUT HEX 1/4-20 PLT
25. Spin one nut fully onto the eyebolt . Add a flat
washer .
26. Insert this eyebolt assembly into a strap hole .
27. From beneath the drill add another flat washer ,
lock washer , and secure with second nut .
There is no preferred orientation for the eye of the
eyebolt.
28. Repeat for all 12 eyebolt locations .
Install Baffles
Refer to Figure 8
29. Place all baffles (
, ) in their assigned positions.
30. Select six (6)new:
816-169C TARP STRAP 15 WITH HOOKS
Secure each baffle by hooking strap to
eyebolts .
31. Re-check seal seating with strap in place. Apply
additional foam seal as required.
32. Select all remaining foam seal . Store it under the
left-most baffle.
Baffle Operation
Baffles slightly reduce the raw capacity of the seed
boxes (the usable capacity remains about the same).
There are no other operational considerations.
Baffle Maintenance
Baffle: Seals
When cleaning out the seed box for the season, inspect
the seals on each baffle, or remove the baffles and check
for any seed flow under the baffle. Add foam seal as nec-
essary (spare foam seal stored under left-most baffle).
Figure 7
Eyebolt Installation
29557
3
15
13
12
15
14
13
12
14
15
13
13 12
15
3
15
14 13
3
Figure 8
Install Baffle
29558
U
D
F
B
L
R
18 17
16
12
12
17 18
16
16
12
19
19
29558 Seasonally