Great Plains 3P300 Operator Manual - Manual (Page 25)

23
Section 5 Maintenance and Lubrication
3P200 and 3P300 Three-Point Sprayer 500-103M 3/6/06
Great Plains Mfg., Inc.
10
PTO Pump (if applicable)
The grease zerk is located on the gear case cover and is
marked with a decal. Grease with five shots of grease.
Type of Lubrication: NLGI grade 2 or 3 grease lubricant
12229
10
50
Multipurpose
spray lube Multipurpose
grease lube
Multipurpose
oil lube Intervals at which
lubrication is required
Lubrication
Legend
Lubrication
Elevator Slide (if applicable)
The hydraulic elevator can be lubricated with dry graphite or
NLGI grade 2 grease on the black elevator pads and vertical
elevator tubes.
Type of Lubrication: Dry graphite or NLGI grade 2 grease
lubricant
15795
Ace Pump
The grease zerk is located on the belt idler arm casting.
Grease with three shots of grease.
Type of Lubrication: NLGI grade 2 or 3 grease lubricant
15797
10