Great Plains 40P Assembly Instructions - Manual (Page 2)

118-811M 1/9/03
Great Plains Mfg., Inc.
Baffle Package Option 2
Refer to Figure 2
2. Line meter covers with foam seal all the way
around the edges.
3. Place meter cover over tube outlets not being
used. Place Seedtube corks in tubes at each
end of the box. See page 6 for placement.
Make sure there is a good seal to rear box
panel.
Refer to Figure 3
4. Use tarp strap to hold meter covers in place
by fastening one end to the box end clip pull-
ing it over the meter cover and hooking it to
the center divider.
Figure 2
Foam Seal
Figure 3
Box Divider
Assembly Instructions for 118-825A Baffle Package
19246
19253