Casablanca Fan Company PN - Manual (Page 8)

8
BlADE/BlADE holDER InSTAllATIon
Step 13. Using the screws from the pack,
attach each blade/blade holder assembly to
the motor.
Using the screwdriver, tighten securely by
hand only.
Step 12. On the flywheel remove the four
shipping blocks by unscrewing the screws.
Discard the shipping blocks and shipping
block screws.
REmovE ShIppIng BloCKS
ShIppIng
BloCKS
Your Brescia fan is equipped with a
flywheel that allows for both 4 and 5
blade installation. The screw holes
surrounded by squares are for 4 blade
installation, while the screw holes in
circles are for 5 blade installation as
shown above.
BlADE
holDER
SCREwS