Casablanca Fan Company PN - Manual (Page 16)

® 3
16
OPERATION HOME-SAFE ® PROGRAM
The home-Safe Program makes an unoccupied home appear occupied by turning the lights
on and off at random times.
To enter the Home-Safe Program:
1) To operate the lights and fan for Home Safe Program – Press the Button off
for a least 5 seconds.
2) Turn the on. Immediately press the buttons in the following sequence: +
+ + . A series of tones will be heard through the piezo-buzzer and
flashing lights indicating the command has been accepted will follow. This program overrides
all manual control of lights and fan. Once the lights turn on, they will automatically turn off
after 2 hours.
3) The lights will automatically cycle on and off in a controlled sequence as follows: ON 1 hour,
OFF ½ hour, ON 2 hours, OFF 1 hour, ON ½ hour then OFF 2 hours. This seven hour pattern
will repeat continuously so that a different pattern of lighting is seen each day of the week.
4) To cancel the Home-Safe Program, press the Button OFF for five seconds.
OPERATION SAFE-EXIT ® AND LIGHT-MINDER ® PROGRAM
notE: Both Light-Minder and Safe-Exit programs will always run at the same time.
The light-Minder Program automatically turns OFF the fan mounted lights after two hours.
to enter the light-Minder Program:
1) To operate the lights for Light Minder Program – Press the button off for at
least 5 seconds.
2) Turn the on. Immediately press the buttons in the following sequence:
+ + + . A series of tones will be heard through the piezo-
buzzer indicating the command has been accepted. Once the lights turn on, they will
automatically turn off after 2 hours.
3) Light operation still remains normal, if you leave the room and turn OFF the lights will blink to
indicate this Safe-Exit command has been accepted. The lights will stay on for 30 seconds and
then begin to dim. After thirty seconds have elapsed, the lights will turn completely off.
4) To cancel the Light-Minder and Safe-Exit Programs, press the button.
The Safe-Exit Program gives you about thirty seconds of light when you turn the lights off,
enabling you to exit your home before the lights go out. To enter the Safe-Exit Program:
1) To operate the lights for Safe-Exit Program – Press the button off for at least five
seconds.
2) Turn the Power on. Immediately press the buttons in the following sequence: +
+ + . Immediately press the Button after an audio tone is heard from the
fan controller. The lights will blink to indicate this command has been accepted. The lights will
stay on for 30 seconds and then begin to dim. After thirty seconds have elapsed, the lights will
turn completely off.
3) To cancel the Safe-Exit Program, press the button off for five seconds.
NOTE: If the lights are left on in the room, the lights will automatically turn
OFF after 2 hours. ( this is Light-Minder)
Light-Minder
Safe-Exit