Cool-Lux A100 - Manual (Page 176)

User’s Manual
9-12
T
ROU
B
L
E
S
H
OOT
IN
G
Diskette drive
For more information, refer to Chapter 4, Operating Basics .
Check the region code on the DVD. It must
match that on the CD-RW/DVD-ROM drive.
Region codes are listed in the Optical media
section in Chapter 2,
The Grand Tour .
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions:
• Use only media recommended by TOSHIBA
• Do not use the mouse or keyboard during
writing.
• Use only the software supplied with the com-
puter for recording.
• Do not run or start other software during writ-
ing.
• Do not jar the computer during writing.
• Do not connect/disconnect external devices
or install/remove internal cards during writing.
If problems persist, contact your dealer.
Problem Procedure
Drive does not
operate There may be a faulty cable connection. Check
the connection to the computer and to the drive.
Some programs run
correctly but others
do not The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software needs.
You cannot access
the external 3 1/2"
diskette drive Try another diskette. If you can access the
diskette, the original diskette (not the drive) is
probably causing the problem.
If problems persist, contact your dealer.
Problem Procedure