Clarion S660 - Manual (Page 40)

37 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
p prro og grra am mm miin ng g o op pttiio on nss
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some
may require installation labor.
The following is a list of the programmable options, with the
factory settings in Bold.
➤ A Accttiivvee arming (from remote only) or passive arming (auto-
matic arming 30 seconds after the last door has been closed).
➤ Arming/disarming siren chirps oon n or off.
➤ The ignition controlled door lock feature oon n or off: When this
feature is programmed on, the doors will lock three seconds
after the ignition is turned on, and unlock when the ignition
is turned off. If your installer is programming the security
system with the ProSecurity Programmer, ignition lock and
unlock are independent features that can be programmed
separately.
➤ Passive door locking (with passive arming) or aaccttiivvee d doooorr
lloocckkiin ngg (only when arming with the remote). Passive locking
allows the vehicle's doors to lock when the security system
passively arms (after the 30-second countdown). This
feature only works if passive arming has been programmed.
➤ Panic mode een naab blleed d/disabled when the ignition is turned on.
(Some states have laws against sirens sounding in moving
cars.)
➤ Forced passive arming oon n or off. If your security system is
programmed for passive arming and the forced passive