Clarion S660 - Manual (Page 25)

22 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
➤ D Doooorr T Trriiggggeerr - If a door is opened the siren will chirp for three
seconds, then the siren will sound and the lights will flash for
the programmed duration and report Zone 3. The three
seconds allow the user time to disarm the system with a
minimum of noise should a door be opened inadvertently
while the system is armed.
➤ H Hooood d T Trriiggggeerr - Opening the hood will sound the siren, flash
the lights for the programmed duration, and report Zone 1.
➤ T Trru un nkk T Trriiggggeerr - Opening the trunk (if connected) will
instantly sound the siren and flash the lights for the
programmed duration and report Zone 4.
➤ IIggn niittiioon n T Trriiggggeerr - If the ignition is turned on the siren will
chirp for three seconds, then the siren will sound and the lights
will flash for the programmed duration and report Zone 5.
When a Triggered Response is activated the transceiver will:
➤ Repeat four quick beeps (or vibrate) for 15 seconds.
➤ The full trigger alert icon (28) will turn on for 15 seconds.
➤ The zone icons will turn on and remain on until a transceiver
button is pressed, clearing the page alert.
➤ The transceiver will enter page recognition mode and
generate alarm page alerts.
note: Icons 13, 14, 16, and 20 represent alarm system
triggered sequence zone inputs. For more information
about icons and the zones they represent refer to the
Standard Remote Configurations section.