Clarion S660 User Manual

Page 27

arming while driving

Your security system can be armed while driving the vehicle!

Simply press

on the remote for two seconds while the vehicle

is running. The siren will chirp once to indicate that the security

system is armed, and then once more to indicate that the ignition

is on. The system will not respond to any input except the door

triggers, and the starter kill relay (if installed) will not be acti-

vated. Once you have arrived at your destination, the system will

disarm when the ignition is turned off. The siren will chirp twice

and the LED will then stop flashing. The system can also be

disarmed at any time by pressing

The LCD 2-way remote will beep once (or vibrate), and the arm icon

(29) will be displayed on the LCD.

disarming

To disarm the security system, press

. You will hear two

chirps, and the parking lights will flash twice. If the power locks

are controlled by the system, the doors will also unlock. The siren

chirping either four or five times when disarming indicates

Tamper Alert, which is described in the Diagnostics Section of

this guide.

➜

note: If the transceiver received a Warn Away

or triggered

response page while armed, the first press of the unlock
button will clear the page alert. A second press will turn
the siren off, and a third press will disarm the system.

➜