Great Plains 2SNG30 Assembly Instructions - Manual

1
Installation Instructions
Great Plains Mfg., Inc.
© Copyright 1998 Printed
Used with:
•
•
•
•
•
113-329M
Two-Section, Hydraulic
Folding Marker
2SF24, 24-Foot Two-Section Drill
2SF30, 30-Foot Two-Section Drill
2SBM30, 30-Foot Bean Machine
2SNG24, 24-Foot Two-Section Native Grass Drill
2SNG30, 30-Foot Two-Section Native Grass Drill
These instructions explain how to install the flat-fold marker on the 24- or 30-foot,
two-section folding drill. The hydraulically operated markers leave a line for you
to follow on the next field pass. Dual markers are equipped with a sequence
valve for easy operation.
These instructions apply to:
113-196A 30-Ft, Single Hydraulic Flat Fold Marker
113-197A 30-Ft, Dual Hydraulic Flat Fold Marker
113-200A 24-Ft, Single Hydraulic Flat Fold Marker
113-201A 24-Ft, Dual Hydraulic Flat Fold Marker
113-283A 30-Ft Bean Machine Dual Hydraulic Marker
Manual Update
Refer to the drill operator’s manual for detailed information on safely operating,
adjusting, troubleshooting and maintaining the markers. Refer to the parts man-
ual for part identification.
• 2SF24 and 2SF30 Solid Stand Operator’s Manual. . . . . . . . . . . 115-015M
• 2SF24 and 2SF30 Solid Stand Parts Manual. . . . . . . . . . . . . . . 115-015P
• 2SBM30 Soybean Machine Operator’s Manual . . . . . . . . . . . . . 173-086M
• 2SBM30 Soybean Machine Parts Manual . . . . . . . . . . . . . . . . . 173-086M
• 2SNG24 & 2SNG30 Two-Section Native Grass Operator’s Manual . . . . 202-499M
• 2SNG24 & 2SNG30 Two-Section Native Grass Parts Manual . . . . . . . 202-499P
When you see this symbol, the subsequent instructions
and warnings are serious - follow without exception.
Your life and the lives of others depend on it!
!!
8/2/2005
Before You Start
Starting on page 6 are detailed lists of parts included
in the marker packages. Use these lists to inventory
parts received.
!
CAUTION!
You may be injured if hit by a folding or unfolding
marker. Markers may fall quickly and unexpectedly if
the hydraulics fail. Never allow anyone near the drill
when folding or unfolding the markers.
!
WARNING!
Escaping fluid under pressure can have sufficient pressure
to penetrate the skin causing serious injury. Avoid the haz-
ard by relieving pressure before disconnecting hydraulic
lines. Use a piece of paper or cardboard, NOT BODY
PARTS, to check for leaks. Wear protective gloves and safe-
ty glasses or goggles when working with hydraulic systems.
If an accident occurs, see a doctor immediately. Any luid
injected into the skin must be surgically removed within a
few hours or gangrene will result.
General Information