Great Plains 2S-2600 Installation Instructions - Manual (Page 4)

195-300M 2/22/2005
Great Plains Mfg., Inc.
Point Row Option 4
Refer to Figure 4
10. Assemble 9/16" x 3/4" elbows (21), from the kit,
to the ports V1, V2 of the block (22). Assemble
9/16" x 9/16" elbows (23), from the kit, to ports
A1, B1, A3 and B3. Install plugs (24), from the
kit, in ports A2, B2, V1 and V2.
Refer to Figure 5
11. Mount valve block (22) to the bracket as shown
using 3/8" x 3 3/4" bolts (25) as shown.
12. Place new decals (26) over the existing decals
to distinguish valves for the LH and RH wings.
Figure 4
Sub Assembly Solenoid Valve
22627
Figure 5
Installing Solenoid Valve
22628