Great Plains CF60 Operator Manual - Manual (Page 23)

4/16/2003 500-015M
21 Maintenance and Lubrication
30
Outside Boom Wing Fold Hinge
There is a grease zerk on both outer fold arm hinges on the
lower side of the hinge tube. Grease until grease starts to
come out.
Type of Lubrication: NGLI grade 2 or 3 grease lubricant
30
Break-Away Pivot Plate
A zerk is located on the round pivot bar on the outside wing
of both sides of the sprayer boom. Grease until grease starts
to come out.
Type of Lubrication: NGLI grade 2 or 3 grease lubricant
Break-Away Tube Pivot
The grease zerk is located on top pivot tube of both the out-
side booms arm break away pivots. Grease until grease
starts to come out.
Type of Lubrication: NGLI grade 2 or 3 grease lubricant
30
50 Multipurpose
spray lube Multipurpose
grease lube
Multipurpose
oil lube Intervals at which
lubrication is required
Lubrication
Legend
Lubrication
Swing Arm Pivot Joints
Two grease zerks are located in each swing arm pivot.
Grease until grease starts to come out.
Type of Lubrication: NLGI grade 2 or 3 grease lubricant
10
12183
12181
12181
12180