Great Plains CF60 Operator Manual - Manual (Page 13)

4/16/2003 500-015M
11 Introduction
Introduction
Great Plains welcomes you to its growing family of
new product owners. This Hydraulic Cross-Fold
Boom has been designed with care and built by
skilled workers using quality materials. Proper
setup, maintenance and safe operating practices
will help you get years of satisfactory use from the
machine.
Description of Unit
The CF50 and CF60 sprayer booms are capable
of spraying at either 50’ or 60’ depending on your
model.
Intended Usage
Use these booms as part of a pressurized sprayer
system to apply liquid pesticides, herbicides or
fertilizers to production-agriculture crops only. Do
not modify sprayer for use with attachments other
than those approved by Great Plains.
Models Covered
CF50 and CF60
Using This Manual
This manual will familiarize you with safety, as-
sembly, operation, adjustments, troubleshooting
and maintenance. Read this manual and follow
the recommendations to help ensure safe and ef-
ficient operation.
The information in this manual is current at print-
ing. Some parts may change to assure top
performance.
Definitions
The following terms are used throughout this
manual.
Right-hand and left-hand as used in this manual
are determined by facing the direction the ma-
chine will travel while in use unless otherwise
stated.
IMPORTANT: A crucial point of information re-
lated to the preceding topic. For safe and cor-
rect operation, read and follow the directions
provided before continuing.
NOTE: Useful information related to the preced-
ing topic.