Great Plains 10 Gallon Stainless Tank Foam Marker Operator Manual - Manual (Page 11)

4/21/2003 500-033M-A
9 Introduction
Introduction
Great Plains welcomes you to its growing family of
new product owners. This Foam Marker has been
designed with care and built by skilled workers us-
ing quality materials. Proper setup, maintenance
and safe operating practices will help you get
years of satisfactory use from the machine.
Intended Usage
Use this Foam Marker as part of a pressurized
sprayer system to apply liquid pesticides, herbi-
cides or fertilizers to production-agriculture crops
only. Do not modify sprayer for use with attach-
ments other than those approved by Great Plains.
Models Covered
Foam Marker S/N S1347 and above.
Using This Manual
This manual will familiarize you with safety, as-
sembly, operation, adjustments, troubleshooting
and maintenance. Read this manual and follow
the recommendations to help ensure safe and ef-
ficient operation.
The information in this manual is current at print-
ing. Some parts may change to assure top
performance.
Definitions
The following terms are used throughout this
manual.
Right-hand and left-hand as used in this manual
are determined by facing the direction the ma-
chine will travel while in use unless otherwise
stated.
IMPORTANT: A crucial point of information re-
lated to the preceding topic. For safe and cor-
rect operation, read and follow the directions
provided before continuing.
NOTE: Useful information related to the preced-
ing topic.
Owner Assistance
If you need customer service or repair parts, con-
tact a Great Plains dealer. They have trained
personnel, repair parts and equipment specially
designed for Great Plains products.
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts.
Always use the serial and model number when or-
dering parts from your Great Plains dealer.
Record your model and serial number here for
quick reference:
Model Number:__________________________
Serial Number: ___________________________
Your Great Plains dealer wants you to be satisfied
with your new machine. If you do not understand
any part of this manual or are not satisfied with the
service received, please take the following
actions.
1. Discuss the matter with your dealership ser-
vice manager. Make sure they are aware of
any problems so they can assist you.
2. If you are still unsatisfied, seek out the owner
or general manager of the dealership.
3. For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060