Great Plains 7560 Series VII Field Cultivator-Floating Hitch Parts Manual - Manual (Page 27)

Revision Comments Part Description Part No. Ref.
Image No. 00040 dwg
PIVOT SPINDLE 2 X 8 1/16 550-015D 1.
SEAL (CR16286) 816-398C 2.
SEAL SLEEVE (CR081071) 816-396C 3.
INNER CONE, JL69349 822-198C 4.
INNER CUP JL69310 822-197C 5.
WALKING BEAM 550-006H 6.
GREASE ZERK 1/4-28 THD FORMING 800-080C 7.
BEARING CUP LM-67010 822-020C 8.
BEARING CONE LM-67048 822-021C 9.
WASHER SPINDLE - 7/8 804-055C 10.
PIN COTTER 5/32 X 1 1/2 LONG 805-089C 11.
NUT HEX SLOTTED 7/8-14 PLT 803-029C 12.
GREASE CAP 2.448 X 1.12 X .25 890-781C 13.
Rev. 2 Purchased Complete HUB 6-BOLT SPINDLE 2 X 14HH 888 815-216C 14.
Rev. 1 Front Side Tandem. See Hub &
Spindle Assembly
RPBY 815-216C 550-005S 14.
Rev. 2 Purchased Complete HUB 6-BOLT SPINDLE 2 X 13HH 888 815-214C 15.
Rev. 1 Back Side Tandem. See Hub &
Spindle Assembly
RPBY 815-214C 550-007S 15.
PIN CLEVIS 5/16 X 2 13/16 USABLE 805-324C 16.
PIN COTTER 1/8 X 1 805-363C 17.
Includes items 1 thru 17 WALKING BEAM ASSEMBLY 560-079L 18.
WHEEL 15 X 6 6 BOLT WHITE 814-220C 19.
TIRE 9.5 L X 15 8 PLY 814-011C 20.
Includes items 19 & 20 TIRE/WHEEL 9.5L X 15 8 PLY WHITE 814-230C 21.
WHEEL BOLT 1/2-20 X 1 1/4 GR5 802-632C 22.
12/09/09 - 27 - 560-201P
Table of Contents Part Number Index
Section 3: Transport
Outside Wing Walking Beam Assembly
(Applies to 7551FC F H, 7553FC F H, 7556FC F H, 7558FC F H, 7560FC F H only)