Great Plains 7560 Series VII Field Cultivator-Floating Hitch Parts Manual - Manual (Page 23)

Revision Comments Part Description Part No. Ref.
Image No. 01131 dwg
PIVOT SPINDLE 3 X 10 1/2 570-054D 1.
SEAL OIL CR27362 3.75X2.75X.44 816-220C 2.
BRG CONE 2.16ID JLM506849 822-110C 3.
BRG CUP 3.54OD JLM506810 822-109C 4.
WALKING BEAM RH 560-306H 5.
(shown) WALKING BEAM LH 560-307H 5.
GREASE ZERK STRAIGHT 1/4-28 800-001C 6.
BRG CUP 2.89ODX.58WD #LM501310 822-053C 7.
BRG CONE 1.62IDX.78WD#LM501349 822-048C 8.
1 HARDENED SPINDLE WASHER 148-404D 9.
PIN COTTER 3/16 X 1 3/4 PLT 805-017C 10.
NUT HEX SLOTTED 1-14 803-095C 11.
GREASE CAP 3.125 X .38 890-277C 12.
Includes items 1 thru 12 WALKING BEAM ASY RH 560-310L 13.
WALKING BEAM ASY LH 560-311L 13.
HHCS 5/16-18X4 1/2 GR8 PLT 802-803C 14.
WASHER LOCK SPRING 5/16 PLT 804-009C 15.
NUT HEX 5/16-18 PLT 803-008C 16.
Purchased Complete See Hub &
Spindle Assembly
HUB 8-BOLT SPINDLE 2.75X17 608 815-251C 17.
HHCS 1/2-13X4 1/2 GR5 802-413C 18.
WASHER LOCK SPRING 1/2 PLT 804-015C 19.
NUT HEX 1/2-13 PLT 803-020C 20.
WHEEL 15X8 8 BOLT WHITE 814-222C 21.
TIRE 11LX15 LOAD F 814-226C 22.
Includes items 21 & 22 TIRE/WHL 11LX15 LOAD F 8BLT WH 814-235C 23.
NUT LUG 5/8-18 X 90 DEG PLT 803-219C 24.
12/09/09 - 23 - 560-201P
Table of Contents Part Number Index
Section 3: Transport
Center Walking Beam Assembly (S/N 1425CC+)
(Applies to 7551FC F H, 7553FC F H, 7556FC F H, 7558FC F H, 7560FC F H only)