Canon SELPHY CDI-E370-010 - Manual (Page 24)

2
Out of operating temperature
Operation of the printer is out of operating temperature. Use the printer between 5
– 40°C (41 – 104°F).
•
Could not add some images
You cannot add the following types of images.
An image with a data size that is too big. Images larger than 8000 x 8000 pixels cannot
be added
An image that is corrupted
An image other than JPEG
•
–
–
–
You can stop adding an image when you press while an image is being added. •
Some image(s) already added
You cannot add an image that already exists on the printer. •
You can not add more images
You can add up to 999 images. However, depending on the data size, you may not be
able to add 999 images.
•
Images can not be added
You cannot add the following types of images.
An image with a data size that is too big. Images larger than 8000 x 8000 pixels cannot
be added
An image that is corrupted
An image other than JPEG
•
–
–
–
Protected!
Protected images cannot be erased. Remove the protection, then erase the image. •
No print history
If you set [Save for Reprint] to [Off], no print history will be saved. If you set it to
[On], each time you print the print will be saved and the print history will display.
•
Incompatible image
Images smaller than 640 x 480 pixels, or images with a width-to-height ratio narrower
than 2:1, cannot be printed in Creative Print. Select an image of a size that can be
printed in Creative Print.
•
You can only print ID photos that are shot with the same number of recording pixels
as “Large” of a Canon PowerShot series or IXUS series camera.
•
CO
PY