Canon SELPHY CDI-E370-010 - Manual (Page 21)

21
No Image. (continued from previous page)
Check whether readable image data is recorded on the memory card. •
The image file name (folder name) sometimes cannot be recognized if it contains
double-byte characters (Japanese, Chinese or Korean). Change double-byte
characters to single-byte alphanumeric characters.
•
Use a personal computer to print data that has been edited or processed on a
personal computer.
•
Hardware Error
Check if there are other problems than cartridge problems. •
Turn the printer and camera power off, then turn on again. If the error message does
not clear, contact a Canon Customer Support center for assistance.
•
Cartridge cover is open
Close the cartridge cover. If the error message does not clear, turn the power off and
on again.
•
This camera cannot print B/W
Insert memory card to print
Black and white printing is not possible when a camera is connected (except when
(PictBridge) is displayed on the LCD monitor of the camera). Insert a memory
card to print.
•
Creative Cartridge Inserted
Change the cartridge
Printing from a camera or a mobile phone using the gold or silver print supporting
cartridge (Easy Photo Pack E-P20G/E-P20S) is not possible. Change the cartridge to
a cartridge other than the gold or silver print supporting cartridge.
•
Cartridge has been changed
The cartridge was changed for a cartridge of a different size after the print menu was
displayed. Insert a cartridge of the same size or change the print settings.
•
Cartridge has been changed
Trim Settings Adjusted
If the cartridge is changed after the trimming settings have been made, the printer
automatically sets the trimming frame again to fit the paper size.
•
CO
PY