Great Plains DVN8324 Predelivery Manual - Manual (Page 3)

Great Plains Manufacturing, Inc. iii
11/25/2013 550-466Q
© Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information ......................................1
Introduction ..................................................................4
Description of Unit ..........................................................4
Models Covered .............................................................4
Document Family ...........................................................4
Tools Required ...............................................................4
Pre-assembly Checklist..................................................4
Using This Manual..........................................................5
Definitions...................................................................5
Shipping ........................................................................6
Unloading......................................................................7
Unload Smaller Items First .........................................7
Unload Discovator ......................................................7
Unpacking Boxes .......................................................7
Assembly and Setup Assistance ................................7
Assembly ......................................................................8
Install Center Hub/Wheel............................................8
Install K-Flex Shanks..................................................8
Install Magnum Shanks ..............................................9
Attach Disc or Coulter Gangs .....................................9
Install Lights and SMV..............................................10
Install Rear Hitch (optional) ......................................11
Completing Setup.........................................................12
Appendix - Reference Information............................13
Torque Values Chart ....................................................13
Tire Inflation Chart........................................................14
Hydraulic Connectors and Torque................................14
Lift and Gang Hydraulic Layout ....................................15
Fold Hydraulic Layout ................................................. 16
Retract Layout ............................................................. 17
8315D Machine Layout, Disc ....................................... 18
8315C Machine Layout, Coulter .................................. 19
8318D Machine Layout, Disc ....................................... 20
8318C Machine Layout, Coulter .................................. 21
8321D Machine Layout, Disc ....................................... 22
8321C Machine Layout, Coulter .................................. 23
8324D Machine Layout, Disc ....................................... 24
8324C Machine Layout, Coulter .................................. 25
8315DVN HD 3Bar Spike W/Reel Layout .................... 26
8315DVN S7T Layout .................................................. 27
8315DVN S5T HR Layout ............................................ 28
8315DVN CH4B Coil Tine Layout ................................ 29
8318DVN HD 3Bar Spike W/Reel Layout .................... 30
8318DVN S7T Layout .................................................. 31
8318DVN S5T HR Layout ............................................ 32
8318DVN CH4B Coil Tine Layout ................................ 33
8321DVN HD 3Bar Spike W/Reel Layout .................... 34
8321DVN S7T Layout .................................................. 35
8321DVN S5T HR Layout ............................................ 36
8321DVN CH4B Coil Tine Layout ................................ 37
8324DVN HD 3Bar Spike W/Reel Layout .................... 38
8324DVN S7T Layout .................................................. 39
8324DVN S5T HR Layout ............................................ 40
8324DVN CH4B Coil Tine Layout ................................ 41
Index........................................................................... 43