Great Plains DVN8324 Predelivery Manual - Manual (Page 14)

10 8315-8324DVN Great Plains Manufacturing, Inc.
550-466Q 11/25/2013
Install Lights and SMV
Refer to Figure 9
45. Remove 1/2 x 1 1/2 bolts
from the left and right
hand light bracket assemblies from center frame.
46. Align the holes with the center frame plate and re-
install the 1/2 x 1 1/2 bolts , secure with the 1/2 lock
washers and 1/2 nuts.
47. Carefully un-band smv sign assembly from back of
center frame, remove 1/2 u-bolts from smv post.
Mount smv sign assembly to back side of center
frame tube as shown as close to center as possible,
re-install 1/2 u-bolts
, secure with 1/2 lock washer
and 1/2 nut.
48. Tighten all bolts to specs, See “Torque Values Chart”
on page 13.
Figure 9
Lights and SMV
41636
1
4
2
3
5
1
2
3
1
4
5
4
5