Great Plains 20’ CPH Operator Manual - Manual (Page 2)

1994 20’ CPH Coulter Tool Bar Brace Assembly 149-721M 3/31/04 Great Plains Mfg., Inc.
General Information
General Information
Great Plains Manufacturing, Inc. provides this publica-
tion “as is” without warranty of any kind, either express
or implied, while every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing,
Inc. assumes no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting
from the use of the information contained herein. Great
Plains Manufacturing, Inc. reserves the right to revise
and improve its products as it sees fit. This publication
describes the state of this product at the time of its pub-
lication, and may not reflect the product at all times in the
future.
This publication, or parts thereof, may not be repro-
duced in any form, by any method, for any purpose
without written permission from Great Plains Manufac-
turing, Inc.
Important Notice
Great Plains Manufacturing, Inc. Trademarks
The following are registered trademarks of Great Plains
Manufacturing, Inc. Great Plains, Land Pride, Applica-
tion Systems, MeterCone, and Whirlfilter.
Printed in the United States of America.
For your convenience, record the information listed in
the spaces provided below. Have this information before
you when calling Great Plains Manufacturing, Inc.
This Operator’s Manual applies to:
149-169A 20’ CPH Coulter Tool Bar Brace Assembly
Owner’s Information
Name: ______________________________________
Address_____________________________________
City _______________ State ____ Zip
Phone _____________ _________
Name of Dealership ___________________________
Dealer’s Name _______________________________
Address ____________________________________
City _______________ State ____ Zip
Phone _____________ _________
Date Purchased _____ _________
Great Plains Manufacturing, Inc.