Great Plains 3S-3000 Assembly Instructions - Manual (Page 10)

195-307M 2/17/2005
Great Plains Mfg., Inc.
Point-Row Option 2005+ 10
Center Drive
Refer to Figure 13
1. Remove center drive shaft (1).
a. Remove drive chains and acremeter (2).
b. Fertilizer drills: Remove chain from cen-
ter sprocket (3).
c. Disassemble breakaway jaw (4) from
shaft.
d. Knock out remaining roll pins at sprockets
and bearings.
e. Remove shaft and sprockets from drill.
Discard shaft.
Figure 13 17093