Great Plains 6324DV Operator Manual - Manual (Page 24)

Section 1: Assembly
Table of Contents ► Great Plains Mfg., Inc.
Series VII 5110-6324 Discovator 550-220M 6/10/2004
22
Center Wing Stop Assembly
U-bolt the center wing stop (1) to the
second bar from the rear on the center frame as
shown in Figure 9. Use 1/2 x 3 x 5 u-bolts (2)
with lock washers and hex nuts. Center the
wing stop from side to side. Insert the 1/2 x 4
1/2 transport lock quick pins (3) in the holders
on the wing stop.
Figure 9