Great Plains Simba 8-10m Press Operator Manual - Manual (Page 22)

22 Simba 8-10m Press
608-205M-ENG
2013-03-08
4.1.1 Simba X-Press
1. Hitch
2. Parking Jack
3. Drawbar
4. Wing Catcher
5. Transport Wheels
6. Wheel Cylinders
7. Out-Rigger Units
8. Discs
9. Levelling Board (if fitted)
10. Single Row 700DD Roll
11. Roll Depth Adjuster
12. Wing Fold Cylinders
13. Levelling Board Cylinders
14. Out-Rigger Adjuster (Vertical)
15. Out-Rigger Adjuster (Lateral)
16. Main Tilt Cylinders
17. Wing Catcher Cylinders
In the Simba X-Press configuration the
machine can be used in reduced tillage
systems to incorporate stubble or to work
down ploughing on lighter soil types. Due
to the massive clearances throughout
the machine the X-Press can operate in
situations where high levels of surface
trash exist . The X-Press is designed for
high speed operation, 8-12 km/h with high
volumes of trash flow being added by the
700mm DD roller at the rear.
4. Adjustment/Operation
4.1 Description
Fig. 4.01: Great Plains 8-10m Simba X-Press
4. Adjustment / Operation