Great Plains Simba 8-10m Press Operator Manual - Manual (Page 12)

12 Simba 8-10m Press
608-205M-ENG
2013-03-08
1. Safety Data
1.5.1 Hitching-up the
machine
There is a risk of injury when hitching/unhit-
ching the machine. Observe the following:
• Secure the machine against rolling.
• Take special care when reversing the
tractor!
• There is a risk of being crushed between
the machine and the tractor!
• Park the machine on firm, level ground.
1.5.2 On the Hydraulic
System
Do not connect the hydraulic lines to the
tractor until both hydraulic systems (machine
and tractor) are depressurised.
Only use appropriate aids when checking
for leaks. Repair any damage immediately.
Spurting oil can cause injuries and fires!
In case of injury, contact a doctor immedi-
ately.
The socket and plugs for the hydraulic
connections between the tractor and the
machine should be colour-coded in order
to avoid incorrect use.
1.5.3 Changing Equipment
• Secure the machine to prevent it from
accidentally rolling away!
• Use suitable supports to secure any
raised frame sections suspended above
you!
• Caution! Risk of injury due to projecting
parts!
1.5 Accident Prevention
In addition to the Operating Instructions, it is
important to observe the accident prevention
regulations specified by agricultural trade
associations. It is the Operator’s respon-
sibility to ensure that all other persons are
excluded from the danger zones surroun-
ding or on the machine during its operation.
It is the Owner’s responsibility to ensure:
• the Operator is trained and competent to
use the machine & tractor,
• the tractor is suitable for the machine
• adequate Risk and COSHH assessments
have been undertaken regarding the
machine’s use. Specifically, these include
issues concerning contact with the soil,
dust, crop residues, chemicals, lubricants
and other compounds during operation or
maintenance, and the possibility of stones
being ejected at high speed during work.
1.4 Road Traffic Safety
When driving on public roads, tracks and
areas, it is important to observe the rele-
vant road traffic laws as well as the specific
regulations relating to this machine.
Pay attention to the permitted axle
loads, tyre carrying capacity, and
total weight in order to maintain
adequate braking and steerability.
Passengers on the machine are
strictly forbidden!
Check that lights / indicators (if
applicable) are working before
transporting the machine.
Max. road transport speed 16mph
(25km/h).
Beware of trapping hazards when
manipulating the light arms or
any other moving parts. Ensure
any heavy components are fully
supported when removing pins /
bolts.