Safety data, 1 operating instructions, 2 use for the intended purpose – Great Plains P14222 User Manual
Page 9

9
Series 5 Toolbar
Operating Instructions
1.1 Operating Instructions:
The Operating Instructions distinguish
between three different types of warning and
safety instructions. The following graphic
symbols are used:
Important!
Risk of injury!
Risk of fatal and serious injuries!
It is important that all the safety instructions
contained in these Operating Instructions
and all the warning signs on the machine
are read carefully.
Ensure that the warning signs are legible.
Replace any signs that are missing or
damaged.
These instructions must be followed in order
to prevent accidents. Inform other users of
the warnings and safety instructions.
Do not carry out any operations which may
affect safe use of the machine.
Safety Data
1. Safety Data
The following warnings and safety instructions
apply to all sections of these Operating
Instructions. All safety instructions for the
machine should be followed.
1.2 Use for the Intended
Purpose
The SIMBA Series 5 Toolbar is built using
the latest technology and in accordance with
the relevant recognised safety regulations.
However, risks of injury for the operator or third
parties and impairment of the machine or
other tangible assets can arise during use.
The Toolbar unit is only to be operated when
in a technically perfect condition and for the
intended purpose, taking into consideration
safety and risks and following the Operating
Instructions. In particular, faults that can
impair safety are to be remedied
immediately.
Original parts and accessories from SIMBA
have been specially designed for this unit.
Spare parts and accessories not supplied by
us have not been tested or authorised.
Installation or use of non-original SIMBA
products may have a detrimental effect on
specific design features of the unit and affect
the safety of machine operators. SIMBA will
accept no liability for damage resulting from
the use of non-original parts or accessories
.
The SIMBA Series 5 Toolbar is designed
solely as a Toolbar unit. Use for any other
purpose, e.g., as a means of transport, will
be deemed to be improper use. SIMBA will
accept no liability for damage resulting from
improper use. The risk will be borne solely by
the operator.